According to the recent “International Energy Outlook 2011” report, only 15% of the energy produced globally is expected to come from renewable energy by 2035, including sources such as hydroelectric power, wind, and solar energy. This forecast echoes what the energy industry has known for some time – worldwide energy production will still rely heavily on fossil fuels.
Oil and gas are critical pieces of the world’s energy mix, and governments worldwide are putting increased pressure on companies within the sector to reduce the amount of emissions created during the production process. In the US, for example, the Environmental Protection Agency is set to issue tighter emissions legislation over the course of the next year. The cost to comply with these new standards, in addition to other international emissions rules, is increasing the interest from oil and gas companies to explore new and effective clean technology processes that can viably reduce carbon emissions.
Carbon capture today
One meet-in-the-middle technique currently being researched and tested is carbon capture. Despite almost US $3.4 billion in Department of Energy financial backing, the US had the largest number of projects CCS cancelled or put on hold in the last year, according to the Global CCS Institute. Eight projects, including ones funded by companies such as Shell and BP, have been delayed or cancelled. The reasons vary, from lack of funding and/or going over budget to lack of governmental policy and public support.
Despite this, there are promising projects currently in the works. Shell recently received funding from the government of Alberta, Canada, to begin construction on its Quest project, a CCS plant near the Alberta oil sands. Chevron’s Gorgon project is the only project in Australia currently in the execution stage. These projects have the potential to reduce the negative impact on the environment and allow for facilities to comply with government emissions mandates.
Most of the current projects use a method of CCS known as injection, which is not without its challenges. Though this is the primary method of CCS, it also is the most controversial. In an injection project, captured carbon is injected into the ground for permanent storage, often into saline formations or un-minable coal seams. It also has been used for EOR in declining oil fields. Injection is an expensive process, usually costing between $0.50 and $8 per ton of carbon injected, plus additional costs for monitoring. Injecting captured carbon also creates concerns about earthquakes, acidified waters, and COleakage. For these reasons, many doubt that injection will ever become a widespread solution without strong governmental policy in place supporting it.
Another method of carbon capture known as mineralization captures carbon as effectively as injection but without the high cost or potential side effects. After the COand other harmful greenhouse gasses are captured, they are converted into mineral byproducts. These byproducts can be stored without the danger of COleaks or sold to reduce the costs of implementing a carbon capture solution. This makes mineralization technology less costly to implement and easier to execute in the current political environment.
Skyonic is the first company to secure a US patent for a carbon capture and mineralization process. The technology, called SkyMine, captures and mineralizes COemitted from flue stacks into marketable byproducts, including sodium bicarbonate, hydrochloric acid, hydrogen chloride, chlorine, and hydrogen. Because it captures COas solid carbonate compounds, there is no concern over earthquakes, groundwater contamination, or leakage.
How it works
The process is divided into three parts: gas handling, absorption, and electrochemical production. In the gas handling phase, the hot flue gas is cooled to room temperature, harvesting heat and water while heavy metals like mercury are removed. The harvested heat is used to undertake the cost of chemical production while the water is reused.
In absorption, the now-cooled flue gas is scrubbed to remove the COand acid gases such as SOand NO. In a reaction with sodium hydroxide, the COforms sodium bicarbonate, and the acid gases form sulfate and nitrate salts. The cleaned flue gas is returned to the exhaust stack, free of harmful chemicals and greenhouse gases.
In electrochemical production, a feed of salt, water, and electricity is used to create the sodium hydroxide that will be used in the absorption process as well as hydrogen and chlorine.
In contrast to many other forms of carbon capture, SkyMine captures COas a stable solid, sodium bicarbonate, more commonly known as household baking soda. Because of the low concentration of acid gases, the bicarbonate is of unusually high purity, guaranteeing simple reuse or disposal. Other byproducts are easily sold to market.
Economics of mineralization
The process is the only carbon capture mineralization technology that profitably captures COand converts it into marketable byproducts. There are a number of revenue streams available to plants using this technique, starting with the byproducts, which can be sold for a profit. Another option is to convert the chlorine produced to hydrochloric acid, which can be resold for use in applications such as enhanced oil recovery. There also are revenue opportunities available from SO, NO, and COcredits, upon certification.
In addition to the revenue streams, there are cost savings within the process itself. The primary costs associated with the process, which include salt, water, electricity, and freight, are all affordable elements. Salt appears abundantly in nature and is relatively inexpensive compared to the outputs produced. Most if not all of the water required for the process can be harvested from the flue gas. Chemical production can occur during off-peak periods when electricity is cheaper. There also is no need for an energy-intensive evaporation step, which helps reduce costs.
The SkyMine process also is relatively inexpensive to install. It can be retrofitted easily to existing structures, eliminating the need for costly remodeling. Instead, Skyonic builds the facility next door and pipes the flue gas emissions into it for scrubbing. This helps keep the initial costs for implementing carbon capture technology low.
Skyonic has been testing its technology on a small scale for several years now. It will begin building the first commercial-scale carbon capture mineralization plant in 2012. The plant, located at one of the largest cement plants in Texas, is designed to capture 75,000 metric tons per year of COand is expected to reach this goal within two years.
With greenhouse gas emissions on the rise, companies across the globe are trying to find an economic way to reduce their harmful emissions. This new solution process is a scalable, profitable, and effective solution for many industries to reduce COand other harmful emissions.
Recommended Reading
Quantum Capital’s View on AI: Lots of Benefits, Pain Points
2024-05-16 - The energy industry is lagging in the race to implement AI, but Sebastian Gass, CTO of Quantum Capital Group, offered a few solutions during Hart Energy’s 2024 SUPER DUG Conference & Expo.
Aramco Credits Adaptability, Collaboration for Driving Innovation
2024-05-15 - Aramco’s implementation of different approaches has led to the creation and commercialization of newer products, said Max Deffenbaugh, principal scientist for Aramco, at the 2024 Offshore Technology Conference in Houston.
OTC: E&Ps Improving Operational Safety with Digitization
2024-05-13 - Artificial intelligence and the digitization of the oilfield have allowed for several improvements in keeping operators out of harm’s way, panelists said during the 2024 Offshore Technology Conference.
Exclusive: Cost-effective Benefits of Extracting from Mature Assets
2024-05-13 - Baker Hughes' well abandonment leader Bart Joppe details the importance of extracting resources from mature assets and the company's approach to managing a well, in this Hart Energy Exclusive interview.
TGS Starts Up Multiclient Wind, Metaocean North Sea Campaign
2024-05-07 - TGS is utilizing two laser imaging and ranging buoys to receive detailed wind measurements and metaocean data, with the goal of supporting decision-making in wind lease rounds in the German Bright.