Forum Energy Technologies revealed it has developed and demonstrated the ability to remotely operate workclass and observation class (Perry and Sub-Atlantic) ROV systems between an offshore vessel and a remote location on Aug. 3.
This new capability brings major opportunities to adapt operational practices in response to the latest industry drives as cost savings and reductions in HSE risks can be realized through reducing offshore crew sizes.
The concept of remote piloting was proven by Forum 2010 when the company successfully operated its TXLX workclass ROV in its test pool at Kirkbymoorside, U.K. from a TXLX console located in Florida, U.S. Remote control capabilities demonstrated were camera and light controls, manifold power on/off, depth and gyro power, pan and tilt controls, manipulator controls, ROV thruster controls, auto heading controls. At that time, internet speeds were much slower than today resulting in high latency telemetry which the control system software was not equipped to counter.
However, continued development in software efficiencies which reduce the effect of network latency coupled with increased availability and reliability of the global 4G network has now allowed Forum to offer remote operations on its full range of ROV systems. Forum’s ICE and subCAN remote operations suites provide a robust means of piloting vessel or platform-based systems from an onshore control facility via a wired, 4G or satellite connection.
The onshore hardware replicates the offshore HMI hardware and GUI so controls will be immediately familiar to operators. The onshore control module provides a local hub for power and data connections.
Existing offshore control station hardware can be upgraded to allow remote control and monitoring of power systems. The offshore control module interfaces with the upgraded hardware providing control and monitoring via the existing ICE/subCAN network. A key-switch, in conjunction with the software, ensures secure control of hand-over between offshore and onshore stations.
The ICE and subCAN control software applies enhanced position control when a compatible DVL and gyro are fitted to the ROV.
The system upgrade components are manufactured and delivered from Forum’s U.K. facility in Kirkbymoorside, Yorkshire.
“Remote operations can reduce the number of personnel offshore, particularly during complex processes or technical procedures which may require a specialist to be deployed. The capability also aligns strongly with industry drives to reduce carbon footprint and deliver safe, efficient operations,” Kevin Taylor, Forum’s vice president of subsea vehicles, said.
Recommended Reading
Stena Evolution Upgrade Planned for Sparta Ops
2024-03-27 - The seventh-gen drillship will be upgraded with a 20,000-psi equipment package starting in 2026.
E&P Highlights: April 22, 2024
2024-04-22 - Here’s a roundup of the latest E&P headlines, including a standardization MoU and new contract awards.
Orange Basin Serves Up More Light Oil
2024-03-15 - Galp’s Mopane-2X exploration well offshore Namibia found a significant column of hydrocarbons, and the operator is assessing commerciality of the discovery.
Deepwater Roundup 2024: Americas
2024-04-23 - The final part of Hart Energy E&P’s Deepwater Roundup focuses on projects coming online in the Americas from 2023 until the end of the decade.
TotalEnergies FIDs Two Developments Offshore Brazil
2024-05-28 - TotalEnergies took FID for two developments offshore Brazil in the prolific Santos Basin where the French energy giant expects its equity production to soon exceed 200,000 boe/d.