Stretching hundreds or thousands of feet into the dark waters below a mobile offshore drilling unit (MODU) is the conduit through which all operations and fluids fl ow. The primary purpose of the vessel’s offshore riser system is to enable the safe transportation of fluids and gases from beneath the seafloor and the surface, and vice versa. From the running, operation and retrieval of drillpipe to well control operations and more, any and all processes that require a surface connection to the well are made possible through riser systems.
The connection is established through a series of 27-m (90-ft)-long riser joints connected together. The integrity of these individual riser joints is paramount, presently requiring inspections every fi ve years to identify any flaws in need of repair. Logistically complex, the inspection process requires the physical transportation of the joints and other components by water to a landbased facility for disassembly, inspection and repair. This approach requires extensive boat trips and trucking of the riser, according to Stress Engineering Services (SES), a provider of consulting engineering services.
SES sought a way to reduce the complexity and the time and costs associated with the MODU inspection process. By partnering with LaserStream, a specialist in the use of laser-based measurement for the inspection of oil and gas equipment and pipe/tubing, a new approach was developed.
The companies combined the power of conditionbased maintenance and monitoring with laser measurement to determine the condition of drilling riser joints, predict when vital components will require service and determine remaining component life. The program uses synchronized drilling and metocean data, along with measured loads on the riser and wellhead system, data analytics and more.
In addition, the process includes data collected through the use of a laser profilometry bore erosion measurement and inspection system (BEMIS). Featuring a scanner head that rotates 250 rpm, the BEMIS can collect more than 3,000 points of measurement in each rotation. These measurements are collected on the inside diameter (ID) of the main bore and auxiliary line between wells to characterize the state of the drilling riser joints. The datapoints are analyzed using the LaserViewer software to map and determine material loss, characterize features to determine what caused the anomaly and perform detailed dimensional analysis of the entire tube, according to SES.
The BEMIS is deployed through the ID of the riser via a tethered crawler while the riser is on deck and eight joints can be inspected in one day. Field results are available at the site, and a final report identifying damage is available within a week.
Recommended Reading
Pembina Pipeline Enters Ethane-Supply Agreement, Slow Walks LNG Project
2024-02-26 - Canadian midstream company Pembina Pipeline also said it would hold off on new LNG terminal decision in a fourth quarter earnings call.
Waha NatGas Prices Go Negative
2024-03-14 - An Enterprise Partners executive said conditions make for a strong LNG export market at an industry lunch on March 14.
Enbridge Announces $500MM Investment in Gulf Coast Facilities
2024-03-06 - Enbridge’s 2024 budget will go primarily towards crude export and storage, advancing plans that see continued growth in power generated by natural gas.
Venture Global Acquires Nine LNG-powered Vessels
2024-03-18 - Venture Global plans to deliver the vessels, which are currently under construction in South Korea, starting later this year.
Summit Midstream Sells Utica Interests to MPLX for $625MM
2024-03-22 - Summit Midstream is selling Utica assets to MPLX, which include a natural gas and condensate pipeline network and storage.