Comstock Resources and Aethon Energy’s wildcat western Haynesville, or “Waynesville,” average full-month daily production increased in June without adding new wells, according to Texas Railroad Commission (RRC) data.
Comstock reported this summer that it had been loosening up some chokes after coming to better understand the more than 2-year-old play’s super-high-pressure regime in the area.
Production from the total 17 wells—online between 27 months and three months—through June averaged 20.642 MMcf/d, up from 20.635 MMcf/d through May.
The horizontals, all in Robertson and Leon counties, Texas, north of Houston, have averaged 814 MMcf per 1,000 lateral feet in their combined 196 months online, according to the data.
Twelve are producing for Comstock; five are online for Aethon.
Altogether, they have produced 123.1 Bcf of gas from roughly two-mile laterals landed in the Late Jurassic, deep, high-pressure, high-temperature Bossier and Haynesville formations.
The newest well—Comstock’s Ingram Martin A #1H—has made 2.1 Bcf its first three months online from a 7,764-ft lateral in Robertson County.
The oldest well—Comstock’s Circle M #1H—produced 16.7 Bcf through June in 27 months online. To date, its output has averaged 2.13 Bcf per 1,000 lateral feet.
Among the 12 Comstock wells, six are in the Haynesville and six in the Bossier.
Testing spacing
Comstock is testing spacing now in its more than 450,000 net acres in the two counties, with two 2-well pads drilled this summer. These will be completed in the fourth quarter and come online by year-end or in early January, according to Comstock.
In addition, it expects to have two more singles—Hodges RLT #1H and Miles BM #1H, both in Leon County—online at that time as well.
One of the two 2-mile pad wells took 54 days to drill; the other, 56 days.
Comstock’s first single wells in the play each took 85 days to drill, while the target formations are at up to 19,000 ft in vertical depth and the laterals averaged 2 miles.
Jay Allison, Comstock chairman and CEO, told investors in a call this summer, “We spent a lot of money putting together this world-class footprint in the western Haynesville. And now we just want to de-risk it, well by well.”
Dan Harrison, COO, added, “We have a lot more money in a Western Haynesville well, but we have a lot more reserves. I mean, the reserves are double.”
Science-ing
Comstock is still science-ing the play to a degree, Harrison added.
“It’s a different type of play. The declines are different. We’re still trying to figure out how to produce the western Haynesville wells.”
Traditional Haynesville wells in northeast Texas and northwestern Louisiana might produce more in their first six months. But Comstock’s been choking back the western Haynesville wells, which are producing more in subsequent months.
“We started off in the western Haynesville being much more conservative with how we were producing the wells,” Harrison said.
In the traditional Haynesville, “we know … how hard we can pull them.
“But in the western Haynesville, we're just on the tip of that learning curve. So we started out very conservative, very low drawdowns,” Harrison said.
More recently, Comstock has loosened chokes some. “We just want to watch the drawdowns and make sure we don't get ahead of ourselves as far as trying to pull them too hard,” he said.
“But everything looks really good. We're just kind of taking our time in that process.”
Comstock is also flowing the wells up tubing when they’re turned into sales, unlike traditional Haynesville wells where Comstock may return a couple of years later and tube the wells, Harrison said.
This is “just because of the very high initial flowing pressures … on our casing strings,” he said. “We tube those up while we're completing the well.”
It results in a different production profile, he said.
“You get a lot more pressure drop downhole before you reach the surface. So the pressures obviously would be a lot higher if we were flowing up casing.”
Recommended Reading
US Drillers Add Oil, Gas Rigs for First Time in Four Weeks
2024-10-11 - The oil and gas rig count rose by one to 586 in the week to Oct. 11. Baker Hughes said the total count was still down 36 rigs or 6% from this time last year.
US Drillers Cut Oil, Gas Rigs for Second Week in a Row
2024-08-23 - The oil and gas rig count fell by one to 585 in the week to Aug. 23. Baker Hughes said that puts the total rig count down 47, or 7% below this time last year.
US Drillers Cut Oil, Gas Rigs for Second Week in a Row
2024-09-27 - The oil and gas rig count fell by 1 to 587 in the week to Sept. 27, the lowest since early September.
US Drillers Cut Oil, Gas Rigs for Fifth Week in Six, Baker Hughes Says
2024-09-20 - U.S. energy firms this week resumed cutting the number of oil and natural gas rigs after adding rigs last week.
US Drillers Cut Oil and Gas Rigs for Second Time in Three Weeks
2024-08-16 - The oil and gas rig count fell by two to 586 in the week to Aug. 16.
Comments
Add new comment
This conversation is moderated according to Hart Energy community rules. Please read the rules before joining the discussion. If you’re experiencing any technical problems, please contact our customer care team.